Having problems with your Vacuums ?
Hoover vacuum (Legacy 740) with broken wheel axle assembly unit
\015 The wheel axle assembly unit on the bottom (controls height of vacuum, i.e., bare floor - shag rug) broke. There was a small metal band sticking out on the bottom of the machine. I was able to remove the unit. I have ordered the part, but I'm not sure how to install the new unit. Is there a repair manual or a diagram indicating how to put this unit back in the vacuum? Thanks\015
Repair Help & Product Troubleshooting for Vacuums
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Hoover vacuum (Legacy 740) with broken wheel axle assembly unit
Hoover wheel assembly replace wheels - Hoover Fusion Vacuum Front Wheel Carriage 93001674
... Hoover Fusion Vacuum Front Wheel Carriage 93001674
I want to open a Hoover S3825 Elite Cyclonic Vacuum to see if I can repair or replace the cord reel assembly. Currently the reel slowly draws the cord back into the canister once it is pulled out. I found the mounting screws under the rear wheels once I removed the hub but I do not know how to remove the rear wheels, everything is plastic. The front screws are under the front caster wheels and I think I need to take a screwdriver and pry off the little cylinder wheel to get to them by rotating
Hoover model#u5215-930 wheel assembly - Hoover Vacuums
... Hoover Vacuums
ASSEMBLY HOOVER U5432 WHEEL AND SPRING BACK ONTO VACUUM
... Hoover U5432-900 WindTunnel Plus Bagged Upright Vacuum
Install hoover vacuum wheel assembly
... Hoover Vacuums
How do you install the torsion spring onto the front wheel unit of a Hoover vacuum, model U5760-910? Thanks!
Is this what you're looking for? Also,the manual for your vacuum is available online at http://www.hoover.com/CustomerService/Manuals/Default.a ... Hoover Vacuums
My husband took the brush and base assembly apart to clean the unit...when he took the wheel assembly off the small white leveller inside fell off. How do we get this back on??
... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum
Need a front wheel assembly for my Hoover Tempo model u5144-900. I see similar looking Hoover wheel assemblies online for different models, will they fit mine?
The Tempo series cleaners look similar, but are different colors. The wheel assemblies will work if they look identical in appearance to yours. ... Hoover U5144900 / U5146900 / U5147900 Tempo Bagged Upright Vacuum
Belt for Hoover Powermax S3606 Canister Vacuum is Broken
Your belt number will be listed on the data label with the model number. Check your local Hoover / Dirt devil dealer for the part. ... Hoover S3606 Bagged Canister Vacuum
Installation of front wheel assembley on a hoover vacuum
... Hoover U6630-900 WindTunnel Bagless Upright Vacuum
I cannot charge my two year old electrolux pronto. I purchased a brand new hand held vacuum for it, but even the new one does not charge. When I plug in the cord nothing happens. If I turn on either the long handle or the portable unit within the long unit, the blue charging light comes on for a few seconds, then out. This tells me that the circuit is intact without a broken wire somewhere. I took it all apart carefully and could see nothing broken or out of place. On re-constructing it, it
It must be the charging transformer. We have already ruled out the vacuum unit. Unfortunately the transformer is not a serviceable part, and will need to be replaced. ... Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne
I bought my [email protected] my local Wal-Mart. It is literally falling apart. The sweeper has NOT been abused. Yes, we have 2 cats & a dog but the problems I am having w/ it should not be warranted. The handle has broken. The wheel/roller on the bottom of the machine has broken off & now it has just stopped working. I repeat, this vacuum has NOT been treated badly @ all. I can not be w/out a vacuum. Thank you for your help, hopefully. Debi
Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=729453\015\012Generic problem for all Vacuums\015\012I bought my [email protected] my\015\012Poste ... Vacuums
The top front corner of the rake assembly on our Littermaid Mega box is broken off. Where and/or how can we get a replacement assembly to fix this. Because the piece is broken off, the "wheels" on that side do not like to stay in the rail and the rake doesn't work properly.
I bought a fantom vacuum on HSN about 9 years ago.Whan it was delivered the first one was broken so they sent a second one.tThat one also was cracked on covering for brush. I called and they told me they were no longer available,so I kept that one,since it would cost me shipping to return.The back right side wheel evenually cracked and fell off.I was able to put it back on and it would stay for a few weeks or so.It now has a large piece of plastic that has broken off the wheel where the bolt fit
Can the Rear Vacuum Wheel hoover aura II be replaced
I have a Eureka Boss Power Plus and the beater bar is rolling, the belt is turning, but after vacuuming up around the litter box (not a lot of litter), when I turn the vacuum off, the litter, or even household dirt, falls out. When I hold the vacuum back to turn it off so that it doesn't fall on the floor, it's sitting in the cubby where the wheels are. The bag is empty, the hose is not plugged, the hose is securely fitted on both ends of the unit. This vacuum was purchased in July and is being
Even though the brush is spinning, you probably need to replace the belt because it is s ... Eureka Vacuums
My Miele vacuum cleaner has the red triangle light on and keeps switching on and off. Is it broken? have been hoovering upstairs and I noticed the hoover had the red triangle light on. I changed the hoover bag but it still kept going on and off. Is this an overheating problem or is the hoover on the way out?
... Miele Vacuums
For some reason, when I tried to put the floor vacuum attachment back on and vacuum the carpet, I realized that the belt was not engaging. the belt is in there and not broken, but it is not turning the beater brush. it is just hanging loose around the brush. When I turn the wheel to engage the brush, it picks the belt up, but when I attach the vacuum to the attachment, the brush is just not turning.
... Kirby Ultimate G Bagged Upright Vacuum
Parts replacement We have a Hoover Steam Vac that has a broken part #10 in your picture or Part # 37271035. Does this part cover the whole top section of the Vac? Is it hard to replace? Where can you get the best prices on Hoover parts? I have been on Hoovers website and they don't even recognize this Steam Vac. which is hard to believe they don't even recognize their own unit? Thanks Ray
This the hood or top cover. There some screws on the bottom as well as on the top, then it comes off. ... Vacuums
Hoover Floormate wheel assembly
In replacing the front wheel assembly, I incorporated a couple of hints from here - first, taking the gray top off by releasing the 6 tabs - 2 front - 2 back - and one on each side - carefully. Then stand the machine up - you need to remove two scr ... Hoover Floormate H3000 Upright Wet/Dry Vacuum
My old bissell 3510 upright vacuum seems to have no suction into the bag...I replaced a broken belt several days ago, and now the vacuum picks up debris, but seems to just collect it behind a wheel..The bag does not "puff out" like it used to...How can I fix this??
... Bissell 3510 PowerPartner Upright Vacuum
My hoover 600 elite is really load. I took it all apart to find the motor fan is damaged with a broken off piece which must have been vacuumed up into the bag. If I replace it sith a new plastic fan will this quiet the vacuum? right now it is tremendously loud.
... Hoover Elite U5061-900 Bagged Upright Vacuum
My rear wheels keep poppping off. I've hammered and glued, but they won't stay on. Do I need new wheels or a new axle assembly?
Greetings,\015\012\015\012You may need to just purchase the the little c-clips that hold the wheels onto the axle. Kirby Vacuums actually have a hub cap on their rear wheels that can be removed to access the axle end with the c-clip. ... Kirby Ultimate G Bagged Upright Vacuum
Bissell - Model 1697 - Powersteamer Pro - Carpet Cleaner I took the unit apart to replace some broken pieces and I can not seat the bottom to the top without properly engaging the soap/water mixer. What is the proper assembly procedure. What is the orientation of the water/soap mix valve when I seat the top to the bottom? The soap/water mix valve needs to engage the knob screw threads but this assembly is a blind operation. Do I turn to the soap/water mix knob to water only then seat the
Hi,\015\012http://dl.owneriq.net/7/7e477b7e-4440-49cf-a219-b68d301549e3.pdf\015\012This diagram will help you see the diagram plus the part assembly no and place it accordingly.I have also given link for Bissell - Model ... Vacuums