Having problems with your Vacuums ?
How do I program a Micronta programmable timer--I set the time to have it go on, but how do I set it to go off?
LCD Programmable Timer\015\012(630-0892) Operation Faxback Doc. # 17153\015\012\015\012Setting The Time and Day\015\012\015\012Follow these steps to set the current time and day.\015\012\015\0121. Slide RUN/PROG/TIME SET to TIME SET.\015\012\015\0122. Press HOUR to set the hour digits. Pressing and holding down HOUR rapid-\015\012 ly advances the hour digits.\015\012\015\012 NOTE: P appears to the left of the hour digits to indicate P.M. hours.\015\012\015\0123. Press MIN (minute) to set the minutes digits. Pressing and holding down\015\012 MIN rapidly advances the minute digits.\015\012\015\0124. Press DAY until the correct day abbreviation appears.\015\012\015\0125. Slide the RUN/PROG/TIME SET switch to RUN. The colon flashes to show\015\012 the clock is running.\015\012\015\012 NOTE: Keep this switch set to RUN to prevent accidentally changing the\015\012 time.\015\012\015\012Setting The Timer\015\012\015\012The timer has 14 settings (1-14). Odd numbered settings specify a time to\015\012turn on the appliance and even numbered settings specify a time to turn off\015\012the appliance.\015\012\015\012Follow these steps to set your timer.\015\012\015\0121. Slide the RUN/PROG/TIME SET switch to PROG. The display shows the first\015\012 setting. If you have not entered any setting, the display appears as\015\012 shown in the illustration.\015\012\015\0122. Press Event to select a setting to enter or change.\015\012\015\0123. Press Hour to set the HOUR digits and press MIN to set minute digits to\015\012 the correct time.\015\012\015\012 NOTE: Be sure P appears to the left of the hour digits when you want to\015\012 set a P.M. hour.\015\012\015\0124. Press Day to select the day of the week for this setting.\015\012\015\012 If you want the setting to apply to every day of the week, repeatedly\015\012 press DAY until all day indicators appear on the display.\015\012\015\0125. When you finish entering the setting, press EVENT. The timer advances to\015\012 the next setting.\015\012\015\0126. Repeat Steps 3 through 5 to enter additional settings.\015\012\015\012 NOTES: Be sure to set the timer to turn off the appliance. The appli-\015\012 ance remains on as long as there is power if you do not set a\015\012 time for the appliance to turn off.\015\012\015\012 To replace an existing event, select its setting number and set\015\012 the new event time.\015\012\015\012 To clear an event, select its setting number and press CLEAR\015\012 twice. Be sure to clear both the on time and the off time for an\015\012 event.\015\012\015\012 If you set the timer to turn on the appliance every day, be sure\015\012 to also set the timer to turn off the appliance every day.\015\012\015\0127. Set the RUN/PROG/TIME SET switch to RUN.\015\012\015\012NOTE: You must set this switch to RUN to turn on or off the appliance\015\012 either automatically or manually.\015\012\015\012 When the timer automatically turns on the appliance, ON appears on\015\012 the display and the indicator lights red.\015\012\015\012 When the appliance turns off, the indicator turns off.\015\012\015\012Reviewing The Settings\015\012\015\012To review the settings in your timer, set RUN/PROG/TIME SET to PROG. Setting\015\0121 appears on the display. Repeatedly press EVENT to view the other settings.\015\012\015\012NOTE: To determine event being programmed, pull the power for a period of 5\015\012 minutes. Then re-power the unit. The first event will be "ON" and\015\012 the next will be "OFF", etc.\015\012\015\012 There will be a number to the side of the display that tells you which\015\012 event you are programming, The even numbers are "OFF" and the odd \015\012 numbers are "ON" events.\015\012\015\012\015\012(EB 3/17/97)\015\012(EB 7/16/97)\015\012\015\012
Repair Help & Product Troubleshooting for Vacuums
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
How do I program a Micronta programmable timer--I set the time to have it go on, but how do I set it to go off?
LCD Programmable Timer\015\012(630-0892) Operation Faxback Doc. # 17153\015\012\015\012Setting The Time and Day\015\012\015\012Follow these steps to set the current time and day.\015\012\015\0121. Slide RUN/PROG/ ... Vacuums
UPM Model ET170 Electronic Timer Programming: A. Is it required to associate one program number with each day of the week? B. Can two programs run during the same day? C. Can each week day run a different program number? D. What is the shortest ON time one must program for the RANDOM function to provide two ON-OFF cycles? E. How do I end the programming mode and start the timing sequence. The instructions with the timer are not clear to me. Thanks for your help.
A. It is required to program each day of the week.B. No. Either it is programmed to be on or off.C. Yes. Each day can run a different program.D.Short random is for 1-2 hours. Long Random is 2-3 hours.E. Once you are done progr ... Vacuums
I cannot find the directions for my Utilitech 1-outlet timer. It has two numbers on the back: #148297 and #TMO1DHBL. I thought that I could just put the time now arrow on the present time and pull up the sections when I wanted the timer on; the only problem is, it lights up whenever it is plugged into the outlet. I just need the directions for setting the timing. Thank you very much Lilla
Model num. 052-8808-8 There are not enough instructions. Where is the manual override? I set the time at 2pm over the arrow and the T , want the timer to come on at 6o'clockpm., set the off time for 10 o'clock pm. Plugged the light in and it came on shouldn't it stay off until 6 o'clock. Need help!
Hi I have a micromark MM9565 digital time switch and have misplaced the manual, i need to know how to set the time, and how to set the timer. Thanks
I hooked up my honeywell econoswitch RPLS740B timer and it appears to be operable and programable, and even switches to on when it hits the programed time, but simply doesn;t turn on the lights. I can't manually turn it on either. Any solutions?
I do not have the manual for the Kitchenaid Coffeemaker, Model# KCM111OB. How do you set the AUTO timer? I can program the clock but cannot figure how to set the AUTO so my coffee pot turns on before I go to work. Thank you!
Utilitech 2 outlet Timer #048373, TM09DHBL Made in China, Setting the time to work! No instruction with it from IKEA, Impossible to make it work !
How do I set the time on the gadget maplin N97HJ timer
I HAVE LOST MY OPERATOR INSTRUCTIONS MANUAL TO ENABLE ME TO SET THE TIMINGS ON MY MS6110 POWERTECH DIGITAL TIMER ? CAN YOU PLEASE HELP ? DENNIS.
Hi, I have a crown digital timer model number cra8442. I have lost the instructions and cannot remember how to set the time. Can you help? Many thanks Michelle
Hi, push and hold the 'yes' button until the day flashes, select day with v ^ buttons. Press 'yes' again to set hour. repeat for minutes etc.\012\012good luck ... Vacuums
How do you set the on and off times for this timer?
May I get the make and model # of the timer to help you more ... Vacuums
Hi, I own a GE 4.8 litre slow cooker. It is very basic. No timer. Therefore, I just turn it off when I get home? It won't count down the time from the highest point of low to the off setting by itself? Also, I am making ribs and have already prepared the sauce. It will be refrigerated over night. Will putting the cold sauce in the warm slow cooker break the ceramic?
I just purchased a westclox tech model 70014 yesterday. I read the instructions and set the time. About an hour later, the time reverted back two hours. I read the instructions again and repeated setting the correct time. I assumed it was working. However, I woke up by myself today at 5:30am, but the clock read 1:14. Is there any way I can fix this or is it a manufacturing defect?
Fast Forward time set feature no longer works. (With this feature, pressing and holding time set and up arrow buttons will rapidly advance time through hours and minutes.) Unit is out of warranty and I need to know the cost of repair.
Hi,the cost of fixing this problem depends on the discretion of the technician,however,in all ramifications,it won't cost you more than $50.\015\012\015\012\015\012Thanks and take care ... Vacuums
How to set plug in timers ? its called lloytron segment timer model A574. have no instructions, how do i set it?
Dirt finder I have a Hoover U6439-900. After the cleaner was used a few times, the dirt finder light cycles between green and red on the regular setting and will not go to green. On the sensitive setting, the red light stays on most of the time. I have tried to run the cleaner to remove any dirt but have not solved the problem.
The sensor may be bad, or it may be coated over with dirt. Re,ove the hose at the back of the vacuum, the head of the sensor is down inside that opening, reach in there and clean it off and see it that corrects the problem, if not replace the sensor ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
O.k. this is the 3rd time I'm writing this...not even sure how many times I'm being charged.... Already aggravated and exhausted so Please, Please help me. I bought 2 Westek 1 outlet timers for our Bearded Dragons. They have to have 12 hours each of specific lighting (day and night). I get the "up" are off times and the "down" pins are on times. The problem is the Clock Isn't working.... Any ideas??? I'm about ready to throw them out the window except we're leaving early in the morning and
There is no money indication on this one. I'm speaking for free, so I hope you're asking for free.\015\012\015\012\015\012Oh yea, I already answered this question.\015\012You bought two bad timers!\015\012\015\012Sorry. ... Vacuums
On my hover U6616-900 the self propell work fine on the med setting on med height carpet, but when I go to low height carpet and height set on med the self propell does not pull the vacuum and it is hard to push. Also if I raise the height to the highest setting the self propell works correctly and appears to clen. Any ideas? S/N 090400184555, think this vacuum is maybe 5 years old and my wife uses it lots. Should I think of maybe a complete overhaul or a replacement at this time?
This is a typical problem you are describing. I would recommend you change the belts, this will resolve the "hard to push" and most likely resove your issues. based on the s/n given you maching was made on sept 2004. ... Hoover U6616-900 WindTunnel Bagless Upright Vacuum
GE 15086 7-day Digital Wall Switch Timer 15086 Having installed and set up timer, and put the switch from timer to off. Then, when I push the door to turn on the lamp, it does not work. Why? Thanks.
I think this is the dealy timer you have installed and if your relay is connected to the other side it becomes and switched on timer.\012So I think if the timer controller is correct you must connect the lamp to the OFF relay and when the door ... GE Vacuums
I have a Sio/Scan Atomic Clock that gives time, indoor and outdoor temp. I have lost the instruction manuel and cannot set time or date since I changed batteries. CN5 V00 U Can you help me?
The Sio/Scan Atomic clocks should automatically set the time and date.Place the clock in a window facing towards Colorado and give it 24 hrs to updateIf that fails here's the web site for them: ... Vacuums
I recently purchased this vacuum after reading consumer reports article on it and from recommendations from family. However, since I've had this vacuum it's been nothing but problems! I have a frieze carpet and I have the vacuum set on the highest setting. Each time I use it, the vacuum clogs with carpet fibers before I even finish a room! Any suggestions?
Is that a shag carpet? the power head is raised up all the way can you lower the suction on it is the carpet old the vacuum may not be able to handle the carpet,go to a vacuum store and see if you can try somthing else out some stores well let you re ... Hoover Tempo Widepath Upright Vacuum - Blue
Our Proteam ProForce 1500 is 1 year old. The vacuum works (****) in the hardwood floor setting on the switch. The beater works on the other setting but it won't **** and beat at the same time. What is wrong and is it something I can fix?
It may be something to do with the actual switch on this unit. \012\012I have a feeling it may have to do with the wiring on the switch itself, perhaps one of the wires have come off or burned on the contact. \012\012Is it som ... Proteam ProForce 1500 Bagged Upright Vacuum
Hello, my janome model 4618LE is out of "*time" I did not find anything in owners manual. I have set "time" on other sewing machines.
I have a Platinum B70 Cofee maker bought from Costco in June of 2010. I have set the on time, the off time, the temperature (192) and the cup size. All went well until today. Now the machine will not accept cup size. It goes to the max only, and it will NOT brew coffee, even though the window says "Ready to Brew".
Take it back as its under warrenty ,i think it may have a problem with the electronics which could be caused by brown out or a voltage spike ,either way its no good unless the computorised panel works ,my best advice is to buy a small coffee perculat ... Vacuums