Having problems with your Vacuums ?
Reset button on thermal cut-off
\015 The owner SAID he cleaned the dirt cup, I took the hepa filter off, cleaned it and checked the other filter. I called him about the hose and he said he was 90% sure the hose was not clogged. In that 1 second that it runs, the 'rod' that comes out of the middle of the motor and turns the belt runs. However, one second is not song enough for it to 'overheat' and activate the thermal cut-off.Original question-where is the thermal cut-off and is there a reset button or can it be replaced. tks for the help\015
Repair Help & Product Troubleshooting for Vacuums
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Reset button on thermal cut-off
Possible reset on Thermal Cut-Off
This is not really expert advise but I have a vaccuum with hepa filters and if the filters get dirty My vaccuum acts like your what you are describing. ... Eureka Vacuums
My Steril Aire upright would not turn on after the bag was full and I replaced it. Turns out there is a thermal reset button right by the sticker that you have to press to reset it.
I just bought a Hoover Platinum Collection MaxExtract Carpet Cleaner (Model No. F8100900). This is the first time I've used it and got half way through one room and the unit cut off and has no power at all. No lights anywhere. On/Off button is inoperable. I checked the outlet and it's still operating so it's not a circuit breaker issue. The problem appears to be with the machine. Has anyone heard of this happening this quickly? Is there a reset button on the machine>
... Hoover Vacuums
My Electrolux upright (3500 series) just quit. I was using it, all seemed fine, then the power cut out (I actually thought the plug had come out of the outlet but that wasn't it, and the outlet is good). Reset button is out, I can't make it stay in. Is it toast?
... Electrolux Vacuums
Hoover c1810 bagged upright - power keeps cutting out - is there a reset button?
There might be a reset button on there but its not meant for continuous use. we need to figure out the problem why the power cuts out. what condition is the cord in? cuts nicks. also check the prongs on the plug. if not that could be a bad switch but ... Hoover Commerical Conquest C1810 Bagged Upright Vacuum
I have an Electrolux Commercial Upright vacuum Model U129C. It has a device which turns off the motor driving the beater bar if something gets stuck in it. There is a simple reset button to restart the beater after clearing the obstruction. Just recently on flat dense low pile surfaces the switch cuts in after just a few seconds and turns the beater bar off. This doesn't happen on high pile carpet but the motor doesn't quite sound normal. There is no obstruction - the beater bar can spin freely
The motor is having a problem.There might be two reasons...either the coils inside it got heated up which will be needing rewinding or you can buy a new motor or there r capacitors attached sometimes u can make a check on that also if that's gone Kap ... Vacuums
Eureka sanitaire SC412 thermal reset
Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=658043\015\012Generic problem for all Vacuums\015\012Eureka sanitaire SC412 thermal reset\015\012 ... Vacuums
Reset button The drive belt on my machine broke. They sent me a new one and I installed it, I think, correctly. It still won't engage and rotate the brushes. I can't find a reset button, but I suspect it needs to be reset. Where is the button? Theresa
Do the brush rolls turn ok? The brush roll motor may be bad.\015\012\015\012 ... Bissell 9400 ProHeat Upright Wet/Dry Vacuum
I need to reset the lock on the samsonite 375 flite comfort and cant seem to do it. It has a red button at the back of the dials with 'on' 'off'. I've pulled it forward and followed instructions to reset it but still it won't reset. I'm not sure if that button has anything to do with resetting it actually???
The thermal motor protector on sears model 116.35912 Kenmore vacuum won't reset. The manual says to wait 30 minutes and the thermal protector will reset on it's own. It appears I would have to take the vacuum apart to get to the thermal protector. Is it worth the effort or should I trash the vacuum?
... Kenmore Vacuums
Dyson DC24 instructions say to push the red reset button for the roller bar. My vaccuum has no red reset button. Where is it?
... Dyson Ball DC24 Bagless Upright Vacuum
Thermal senser on the side of the vacuum motor there is a little thermal senser that has rust all inside of it ,my ? is will that cause the motor to shut down ,could the rust in the senser causing it to cut off ,cause the vacuum runs well then cuts off
If it is going bad, it will cause the motor to shut down, replace it then you will know if that is the problem or a problem with the motor itself. ... Vacuums
I have a Beam serenity plus SP800A vacuum, the red light went on and the bristles stopped turning when I vacuumed up my bathroom rug. what does the reset button look like. Or does this model have a reset button. how do I turn off the red light so that the bristles start turning again?
... Beam Industries 2775 Serenity Plus Central System Vacuum
Reset button We're is the reset button
... Broan-NuTone CV450 Central Bagged Central System Vacuum
Can't find reset button
... Carpet Pro CPU 2t Commercial Vacuum Cleaner
The head on my guardian suddenly quit working while I was using it. The reset button seems stuck up. Are their any more reset buttons
No, that's the only one. Make sure there is nothing wrapped around the roller brush. If so, clear it. Try pressing the reset button, then start machine. If nothing, there's good possibility the switch is broken or worn out. I recommend taking to ... Electrolux Guardian Bagged Canister Vacuum
I have a DC14. About a wk ago it was making loud sound and bar stopped turning. i unclogged everything....now the suction works great. However, the bar still wont turn. The belt inside is still intact and isnt loose. Several solutions suggested resetting the "Red" button...i have searched the vacuum over and over. there is NO red or any other color reset button. The bar is set down perfectly in there, the cover plate is installed properly. What other problems could there be? Or do i just need to
... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
Power nozzle on E-series won't start when cold unless the red 'reset' button is pressed multiple times while also holding the trigger to 'warm it up'...this is w/the power nozzle off the floor - no restriction on it turning. Once it's been running and then turned off the button must be pressed w/the trigger to get it to run - again w/the nozzle off the floor. It also seems to shut off too easily while vacuuming. I replaced the motor,which didn't fix it. Is the reset switch next on my list? T
... Rainbow E series Canister Wet/Dry Vacuum
I opened the cannister to change the bag and when I closed it the motor switch will not turn on. The second position which turns on the attachment for rugs still comes on. We thougth it was the switch so we ordered the part and it is still doing the same thing. Is there a reset button somewhere inside? The only reset button I see is on the attachment which is working.
It can be a few things. First check the overload protector located on top of the canister. If it has tripped the unit will not run. Push it in to reset. \015\012If that is the problem check the motor safety filter to see if it is clogged and caused t ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
I need to know if it has a reset button. we had a power outage and it has stopped working since than. cant find a button to reset it.
Vacuum cleaners do not have reset buttons instead it would have a thermal protection breaker integrated within the motor if the motor overloads it will shut off but will start again as it cools down.Check to make sure the outlet has power in it first ... Vacuums
I have a kenmore progressive vacuum with a belt reset button that trips out everytime you try to vacuum. It does it in about 5 to 10 seconds. Can I bypass the reset button or can you help me determine the problem. Thanks
A lot of times the reset button is tripping because there is a problem. The problem could be with the brush roller in this case. A lot of times I see this unit for repair and the end of the brush is so compacted with hair and debris that it has also ... Kenmore 25614 / 25615 Progressive Bagged Canister Vacuum
My Miele S748 will not run the overheat light and reset light on but can not find a reset button
... Miele Vacuums
Dyson animal dc07 does it have a reset button?
The reset button is incorporated into the on/off switch for the brushroller which is the grey button next to the red power button. Try hitting that button separately. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Is there as reset button on the eureka rally 2