Having problems with your Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum ?
Loud screaming noise when running
\015 My DC08 vacume is about 3 years old and has gradually been getting louder and louder with each use.\015\012It is at a point now that I am unable to think while vacuming and it gives me a headache. Is it a NEW motor that is required?\015
The vacuum is clogged. Disassemble it as much as you can and you will find the problem.
Repair Help & Product Troubleshooting for Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Loud screaming noise when running
The vacuum is clogged. Disassemble it as much as you can and you will find the problem. \015\012\015\012Ray ... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum
It's making a very loud noise when running. I have a Bissell Quicksteamer series 2080. When I was using it yesterday it was making a light squealing noise then it turned into a loud racket. I shut it off and and cleaned the brush (lots of dog hair on it) But the racket continued.
... Bissell 1770 Quicksteamer II Upright Vacuum
I replaced the belt on my Dirt Devil Featherlite Bagless Vacuum and the brush roller rubs and makes a very loud noise when turned on. I have gone exactly by the manual instructions and made sure the belt and end caps were on correctly, but the bristles still rub the back and it makes a very loud noise. Without the brush roller in the vacuum, it sounds and runs normal. What could the problem be?
Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=561283\015\012Generic problem for all Vacuums\015\012I replaced the belt on\015\012Posted by piggyt ... Vacuums
A loud grinding noise happens in the tilted/unlocked position. This noise can be heard when running over the fringe of an area carpet. What causes that noise?
Hi there it's SmartAlec from NelsonVacuums.com.au here. It is the clutch of the brush activating. It is designed to stop the brush from chewing up curtains etc. If it is to ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Makes a loud noise like a grinding noise then smokes comes out and it smells like burning rubber? When I take the (rod) brush off with the belt then run the vacuum there is no more noise? Please help me thank you
Your belt is worn and stretched and so it is slipping on the motor drive shaft. That is why it is noisy and smells like burning rubber. You simply need to replace the belt. You can get replacement belts here: ... Vacuums
Noise My Dyson DC08 is making a loud, rough, vibration/noise that seems to be coming from the from the rotating brush housing. I replaced the old belt which was several years old and slipping. When I run the motor with the new belt removed the machine sounds normal. The bearings on the rotating brush seem to be running smoothly when turned by hand both when out of the brush holder and when installed in the machine. I can't find anything rubbing on the belt or rotating brush. I applied a bit o
Hi there, it's Jack at Dyson.\012I'm sorry to hear you're having difficulty with your Dyson vacuum. From your \012description, it sounds like the model number you've supplied may not be correct, \012as DC08 is a cylinder vacuum which doesn't use ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum
I HAD MY DC17 VAC FOR 3 YRS NOW NO PROBLEMS AT ALL, I REGULARLY CLEAN THE FILTER LIKE IT SAYS BUT LATELY I'VE NOTICE THAT THERE SEEMS TO BE A LOT MORE COLLECTION ON THE TOP OF THE FILTER WHEN I'M DONE VACUUMING. IT HAS ALSO STARTED THIS WEEK TO MAKE A VERY LOUD HUMMING TYPE NOISE WHILE RUNNING, I HAVE CHECKED FOR ALL POINTS FOR ANY BLOCK AND NOTHING AND NOW TODAY IT RUN A FEW MINUTES AND STOPS AUTOMATICALLY,IT WILL RESTART AFTER I LET IT SIT UNPLUGGED.WHATS UP WITH THIS THING, IT HAS BEEN GR
The vac is over heating. First, you should try a new filter. Also, keep in mind that after cleaning the filter, make sure that it fully dries. Using a wet or damp filter clogs it quickly. Second, turn the vac upside down and make sure that the roller ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
My bissell model 18Z6 has developed a loud noise and vibration when the brush is running. I have removed the brush assy and cleaned all the hair, etc but still the noise. I ran the brush motor with the belt disconnected and all seemed ok, but of course there was no load on the motor. I suspect a problem with the brush assy bearings or axle or both but I hate to just throw parts at the problem. any suggestions would be greatly appreciated.
... Bissell Vacuums
Dyson noise. My Dyson Animal vacuum is making a very loud noise like screaming
Check all ports for a clog, there are removable covers you can take off, also check the hose for a clog. Make sure all filters are clean. Worse case is a problem with the motor. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Kirby g6 My kirby is running louder than usual. Kind of like its screaming instead of running now. Its working fine, but the noise is really unbearable. What could it be?
Could be the bearings, especially if the machine is old or the dust filters have not been replaced regularly.\015\012Check to see if the noise is still present after the machine winds down when the power is turned off. A rattling sounds means b ... Kirby G6 Bagged Upright Vacuum
Loud noise when running.
Have a look also at ebay.\015\012http://catalog.ebay.com/Hoover-H3010-Upright-Wet-Dry-Vacuum_W0QQ_fclsZ1QQ_ ... Hoover 5416-900 WindTunnel Bagged Upright Vacuum
Hoover steam vac making loud noise, not running
... Hoover Vacuums
Vacuum makes a loud noise when running - Vacuums
Impeller is more than likely broke ... Vacuums
Vacuum makes louder than usual loud noise and seems to run at a super high speed. I wonder if a belt needs to be replaced.
... Eureka 421A EZ Kleen Bagless Stick Vacuum
How do I open my kenmore powermate vacuum (model # 116. 22100400C)to get at the motor?It's making a loud noise when running.
... Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum
Bissell cleanview helix makes loud noise when the roller is engaged. The motor runs quiet when the belt is disconnected. Do i need a new brush roller? I already replace the belt
... Bissell 21K3 CleanView Helix Bagless Upright Vacuum
Sharp bag less makes loud noise at air vent while running. This is new . What is cause.?
There is probably something stuck in or near the vent that is acting like a reed in a clarinet and playing you a note. Clean out the vent. ... Sharp 15" Bagless Upright Vac Metal Brushroll SH-20220
My Dyson Root 6 made a loud banging sound, and now its motor emits a strong burning smell every time it's switched on. It runs for a second or two, making a lot of noise, and then stops. (Just bought a new battery for it, too - what a drag...) It's off warranty, and Dyson wants almost as much to fix it as a new one would cost. Is my Root 6 e-waste, or is there anything that can be done for it?
... Dyson DC16 Root 6 Bagless Handheld Cyclonic Vacuum
A friend who bought a multimaster less than a year ago has had his start a loud 'clattering', dry, noise, and the gearbox started to get hot. The output shaft now has about the same amount of slop as the total movement should be. It is one of the quick attach type. I bought one of the allen key attach type, and have found in the past with various 'name brand' tools, drills, angle grinders etc that they usually use a 'dry' type grease which soon throws off the necessary parts and they run dry u
Fein is an excellent tool and has an excellent warranty that will be void the moment you open the gearbox. I do not recommend this action. Fein is quick and responsive, especially for a less than one year issue.\015\012Farmerbear at FixYa.com ... Fein Multimaster Rs - Msxe 636 - 2 Rs
G5 Kirby Vacuum...makes a loud noise on initial startup and then runs smoothly...it does this for both the attachment and powerbase...I cleaned out the passageways...Im thinking its the belt but if thats true...why does it do that with the attachment? help pls!!
Check your fan for stress cracks around the center, rotate while off for resistance or any noise. these frequently crack and rub against the inside of the housing. also listen and feel for bad bearings ... Kirby G5 Bagged Upright Vacuum
Kirby G3 made loud noise when running. Sprayed silicon in fan thinking it might be a bearing. Found a coin and nail in fan and removed. Tha vacuum would not turn on. Replaced switch and brushes. Still nothing. Did the silicon spray do something?
No - the silicon is an insulating material and would have no effect on the electrics of the vacuum. Most likely you have a bad connection - dismantle the vacuum again and check the wiring and the motor with an ohmmeter. Be very attentive with the bru ... Kirby Generation 3 Bagged Upright Vacuum
My Dyson DC17 seems to be overheating? Started to smell like something was burning after running it for 15 min or so. I turned it off for an hour or so and then started it again and now is making a loud rumbling noise
You need to replace the worn belt. Here is the belt you need and a manual you can view which has instructions:\015\012\015\012Dyson DC17 Belt and Manual ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
Simplicity freedom model f3300 makes loud noise when running.
Sounds like the fan might be broken in the motor ... Vacuums
Model #3760-2 Bissell upright vacuum- making very loud noise when running. Cleaned all filters- no difference
Is the noise coming from the belt area, ie. beater bar, or does it sound like it is coming from the motor itself? It is possible there is something caught in the brush roller.When you turn the roller off, does the noise go away? ... Bissell Vacuums
Loud noise while running - Eureka Bravo II Bagged Upright Vacuum
Vacuums typically make a loud noise when running. Can you describe the noise or why you think it is unusual? ... Eureka Bravo II Bagged Upright Vacuum