Having problems with your Electrolux Lux 7000 Bagged Canister Vacuum ?
Full bag system works properly, but doesn't reset easily
\015 I have an Electrolux Epic 6500 SR (predecessor of Lux 7000).The full bag system works properly--it shuts down the vacuum when the bag is full and illuminates the full bag light.However, when I try to start the vacuum again with a new bag, the full bag light stays on and the vacuum doesn't reset right away.If I put a new bag into the machine and press the on/off switch 5 +\015\012times, the full bag light goes out and the vacuum starts running\015\012again. I have had several of these vacuums with the full bag sensors\015\012and I have never run into a problem with the system on any of them before.Here's the scenario:1. Vacuuming until the bag is full and the sensor switches off the machine and the full bag light illuminates.2. Press on/off switch to turn "off" vacuum--Full bag light stays illuminated.3. Insert new and empty bag.4. Press on/off switch to turn on vacuum (full bag light is still illuminated).5. Vacuum does not turn on (full bag light is still illuminated).6. Press on/off switch 5+ times and the full bag light turns off.7. Press on/off switch and vacuum turns on.Anyone have an idea? The Aerus/Electrolux service agent near me simply tells me that I should invest in a new vacuum cleaner. I know that there is an alternative solution here.\015
Either there is something wrong with your switch. Which it doesnt sound like it. Take it to your dealer or call another one it sounds like the control valve needs to be replaced. I am a dealer 1-866-966-9350.
I opened the case and watched the full-bag switch in action. It reset every time but still failed when the hose was connected. I saw nothing to suggest that five on-off cycles of the switch would reset anything, but tried it five times anyway. I tried taping a bit of foam at the end of the bar the vacuum switch moves and it worked fine for about five minutes after reassembly. I gave up, popped it open again, disconnected the clear hose from the vacuum switch and plugged the end of the hose leading to the dial control so that it wouldn't be a constant bleed on the vacuum. When it begins to lose suction I'll check the bag just as I do on other vacuums.
Repair Help & Product Troubleshooting for Electrolux Lux 7000 Bagged Canister Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Full bag system works properly, but doesn't reset easily
Either there is something wrong with your switch. Which it doesnt sound like it. Take it to your dealer or call another one it sounds like the control valve needs to be replaced. I am a dealer 1-866-966-9350. ... Electrolux Lux 7000 Bagged Canister Vacuum
Electrolux Epic 6500SR Full Bag sensor working, Does not Reset properly
The problem was a sticking switch that was not being reset. The vacuum on/off switch mechanism is comprised of two switches. One is the main switch that turns the vacuum on and off. The second is a shut off switch that gets tripped when the full b ... Electrolux Epic 6500 Vacuum
Eureka model 7605 type A - 'the boss' lite. would not power on yesterday. working perfectly before. i replaced full bag with clean bag this morning. still won't power on. is there a reset button, or anything else i can try? Thank You!
... Eureka Vacuums
Havent used for about two years. I had to put the belt on it. It doesnt seem to be sucking up very well and after about 15 minutes of vaccuuming the bag was empty. My house got really dusty. I know the rollers were spinning because i looked. I could hear some dirt going in but could definatly tell it wasnt working properly. Is it in reverse or something?
After two years you need to make sure the bag is connected properly and inspect it for tears and that the hoses are connected correctly and not deteriorated. Make sure the hose is clear. You should be able to feel the suction at the end of the hose. ... Vacuums
Sebo X4 when switched on bag full and check brush lights momentarily light up then go off and motor doesnt work
... Sebo X4 Bagged Upright Vacuum
My Windsor Sensor XP12 says the bag is full when it's not. I have removed the hose, brush, and filter and cleaned everything. I can put a bag on without the cover and it works great. However, when I add the bag to the front cover and close the latch the right way, it does not work. I'm thinking that the cover is not seating the bag correctly over the hole, but I can't figure out how to fix it. Any suggestions?
... Windsor SR12 Sensor Bagged Upright Vacuum
Changed the motor carbon brushes on my Beam central vacuum cleaner equiped with an IntelliWatch system. This system includes the Alutron DB100 module. This Alutron module needs to be reset so that the vacuum cleaner can operate properly. I believe that this module keeps log of running time and disables operation after a predetermined time. Can you help me with providing a reset procedure that will reset this module. Thanks
... Sunbeam Vacuums
Won't work My Eureka Mighty Mite 3670 Bagged, was working fine, and we unplugged it to switch to another outlet in another room and it just stopped. We tried several other outlets and it just won't turn on. We thought maybe it got hot because we had been using it for a while and we let it rest for a while and then changed the bag just to be sure, although it was not full. But it still will not turn on. Any ideas?
Http://geeksquad.fixya.com/ThreadView.aspx?prdid=12151&thid=646957\015\012Won't work (by 2 users)\015\012Posted by AndiR on Jun 04, 2008\015\012My Eureka Mighty M ... Eureka Mighty Mite 3670 Bagged Canister Vacuum
When removing the canister bag, the plate and spring that it slides into popped out. When I put them back in, the bag full indicator is completely red. It is a new bag and filters. I think I am not getting the plate and spring back in the canister correctly. Any instructions or pictures showing proper insertion and configuration of these? I looked in the manual and the part is only shown while bag being inserted.
... Miele S514 Solaris Bagged Canister Vacuum
My bush bag less vacuum cleaner 1800 is not working properly keeps saying blocked cant find manual
... Bush Vacuums
Sebo x4 bag full light not working
Replace bulb ... Sebo X4 Bagged Upright Vacuum
Dust bag was full and have changed it but not getting proper suction since bag change - why?
The extension tube is probably blocked.\012Check for suction with all the tubes off - if there is suction now then the tubes are blocked - be carefull not to damage them if you poke things in the unblock them. ... Miele Revolution 600 Bagged Canister Vacuum
My 2001 miele stopped working Black cannister. I believe cleaning ladies overheated it as the bag was very full and the vac felt warm to touch. I replaced bag and let cool down but it will not start. This has happened before and the vac store said they replaced the cord because it tends to go when it over heats. I have not taken in for and estimate but I fugure it will be at least $150 to repair. Is the another option.
... Miele S548 Bagged Canister Vacuum
Sudden loss of suction. Using a dirt devil upright. Checked the belts that were changed recently and working. Changed the half full bag. No change. Checked for blockages and as far as I can see there are none. The blower is working as much as it ever was I think but I;m stumped.
R u sure there is nothing cought in the hose? ... Dirt Devil Featherlite Bagged VacuumVacuum
It will not turn on the bag was full. we emptied the bag . it still does not work. The fuse is Ok,
If this just happened, tho I see by your posting it was over an hour ago... sometimes the thermal reset there has tripped off and needs for it to cool down. The other thing is there is a reset button on the unit itself that should be pushed in for i ... Broan-NuTone CV450 Central Bagged Central System Vacuum
My atomic clock has not worked properly since we received it. The projection time was off from the real time and now the clock face is blank except for 2 lines. We followed the directions to press snooze to get the projection time right. That didn't work and I have also reset the clock but there is no display.
I have had several atomic watches and they are difficult.\015\012What make & model do you have?\015\012What is the website, if I can find instructions, I may see them in a different way.\015\012If the time is off, it may be savings ... Vacuums
Using hoover, stopped working. Bag very full so changed. Hoover seems very hot. Will not work. Checked fuse
Give the vacuum time to coold\\ down, then try again. If it still doesn't work, take it to a repair shop to be checked.\015\012When a vacuum is used for long after the bag is full, the motor can overheat to the extent that the motor burns out. ... Miele Cat & Dog 326i Bagged Canister Vacuum
Cleaner stopped working, changed bag still not working. Have checked mains fuse and liittle fuse on printed circuit board. When cleaner is on moving slider to the off positon the LED's glow red for a fraction of a second. Reset button does not feel as though it clicks when pressed, it does not seem to move. Many thanks, Hugh
... Panasonic MC-E583 Bagged Upright Vacuum
Vacuum working perfectly and everything stopped. Went to the utility room and found a plastic bag on top of the equipment. Tried the reset button, etc. nothing works.
Sounds like a bad relay in the tank just a simple repair but should be done by a vacuum tech or electrician. Could be a motor is nothing is starting at all, but not as likely. ... Broan-NuTone CV353 Central Vacuum
My wind tunnel keeps breaking its belt. The big one. The little one is properly attached. This is a recent problem so it has nothing to do with the rug height settings. I just broke two in the course of 15 minutes. The bag is NOT full, the brush/beater has been cleaned and properly attached Help.
Well will the brushes turn freely as they run in bearings if its got wool of cotton raped around the side of the brushs that will make them tight to turn and will brake every belt you put on it, in a flash,,,\015\012the other thing that causes ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
I was putting some bedding in a bag for storage and decided to ''**** it down with my dyson hose to fit it in a smaller space. My dyson quit working and now it will not turn on can you please help...??? I know I didn't **** anything up but I can't live without a vacuum!! I have tried the brush reset button but can't find another reset...
There is no other reset. The Dyson will cut out if it gets too hot, but resets itself when it cools. In doing the job you describe, I doubt that you have operated it long enough to cause overheating, or to do any other damage. I suspect the problem i ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
I have the Miele cat & dog S5000 vacuum. I have had it about 1 year and lately the suction doesn't seem as strong and the full bag indicater is always full. I have followed instructions in manual but nothing works?
Greetings,\015\012\015\012I would say that you have a slight clog in the hose or in the power nozzle somewhere. The full bag indicator is just a guage that will indicate full when it feels like it's lost suction. Example: If you were ... Vacuums
I opened the cannister to change the bag and when I closed it the motor switch will not turn on. The second position which turns on the attachment for rugs still comes on. We thougth it was the switch so we ordered the part and it is still doing the same thing. Is there a reset button somewhere inside? The only reset button I see is on the attachment which is working.
It can be a few things. First check the overload protector located on top of the canister. If it has tripped the unit will not run. Push it in to reset. \015\012If that is the problem check the motor safety filter to see if it is clogged and caused t ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
My eureka smartvac 4870 has no suction at hose or floor. all hoses are clear, filters clean and properly installed. bag not full and properly installed
Your eureka has no suction kuz the vacum hose needs cleaning ... Eureka Smartvac 4870 Bagged Upright Vacuum
Electrical problem The light comes on but the motor will not come on when the on button is pressed. Is there a reset button? I thought it was because the bag was full but I just changed the bag and the motor still will not come on.
The light is separate from motor. No reset switch. Check for a fuse but i suspect it may be brushes are worn out and not making contact.Sometimes that starts as an intermittent.Hopefully one of the coils isn't open circuited. ... Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum