Having problems with your Hoover V1 SteamVac SpinScrub Vacuum ?
Loud Grinding Noise
\015 Bought a steam vac from a garage sale. I'm a first time user, and it worked great, but ehn all of a sudden it started making a grinding noise, so I turned it off, and it will not power back on. My husband checked for something possibly stuck in it, or a busted belt, but can't seem to find the problem. He also noticed that the fuse did not burn out. Is there something in it that can be replaced or is the motor burned out?\015
Take out the brush block and see if it will power on, if not then probably your motor has gone bad.
Repair Help & Product Troubleshooting for Hoover V1 SteamVac SpinScrub Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have a windsor vsp 14, it is making a bad grinding noise, when I take the top blue piece off it stops, the brush works fine and when I put the top back on it grinds really loud and gets hot. it still vacuums and the belt and brush are working fine, can't figure it out. and when the lid is on I cant see what its grinding on. It only makes a grinding noise when you pull handle back and engade to vacuum flor and stops when you put it upright.
... Windsor VS14 Versamatic Bagged Upright Vacuum
When I vacuum w/ the brush control in the on position it make a really loud noise, almost like a grinding sound. I have looked at it and nothing seems to be wrong, but I notice that the pin that engages the belt seems to vibrate a bit, possibly creating the noise. It started when I accidentally got part of a plastic grocery bag caught in the brush. Could it have stretched a belt? Nothing is caught any other place and it only makes the noise when the brush in in the on position.
Yes, the belt could have been stretched and is now vibrating and hitting other parts and creating a noise if much of the bag got caught under the belt. If you have another belt for this vacuum, please put it on and see if the noise stops. If it does ... Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum
A loud grinding noise happens in the tilted/unlocked position. This noise can be heard when running over the fringe of an area carpet. What causes that noise?
Hi there it's SmartAlec from NelsonVacuums.com.au here. It is the clutch of the brush activating. It is designed to stop the brush from chewing up curtains etc. If it is to ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Makes a loud noise like a grinding noise then smokes comes out and it smells like burning rubber? When I take the (rod) brush off with the belt then run the vacuum there is no more noise? Please help me thank you
Your belt is worn and stretched and so it is slipping on the motor drive shaft. That is why it is noisy and smells like burning rubber. You simply need to replace the belt. You can get replacement belts here: ... Vacuums
Burning smell loud grinding noise when tilted
Hi there SmartAlec from NelsonVacuums.com.au here. The rattle is the clutch engaging. It can happen for a couple of reasons. The best case f ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
He dyson is making a very loud grinding noise
The belt that rotates the beater bar may be damaged - call the Dyson helpline for troubleshooting and for a solution to the problem. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
I get a loud grinding noise when the knob is set to carpet and the brush is engaged. I made all visual checks per the manual. Everything is clean in in order. The noise originates in the housing where the selector switch resides
Its probably the clutch assembly that switch's the brush off and on. i would take it to someone to fix it, it isn't an easy job. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
LOUD GRINDING NOISE ALL OF A SUDDEN , LOOSE BELT ?
You will probably have a faulty roller bar take of panel on bottom of vaccum. Now remove the roller bar hold the bar by both ends and try spinning. This should be easy and smooth if not pull off the end cap these will be very tight and check the bear ... Dyson DC07 Bagless Upright Cyclonic Vacuum
Loud Grinding Noise
Jhu ... Hoover V1 SteamVac SpinScrub Vacuum
My Bissell Cleanview Bagless vacuum makes loud grinding noise.
The ends of the roller have something wrapped around them.see if you can pull the ends off so you clean the caps and bearings ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum
Making loud grinding noise brushes not working
... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
My bissell pro heat 25A3/64D9 series just started making a really loud grinding noise while on. Can anyone assist me in determining what may be wrong and how to fix the problem. Thanks.
... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum
Loud noise I ran over a string and then shut it off quickly. It now makes a horrible grinding sound. Did I ruin the motor? Sounds like something came undone. I checked the belt and that is fine. Ideas?
I think you damaged the belt. I ran over a sock once and it made a grinding noise but still worked for several months after the incident. Finally, the belt broke off. I had it replaced and now it doesn't make that sound. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
My Dyson dc-07 makes a loud grinding noise only on the carpet setting.The belt seems to be fine,and the brush spins normally.Do I have a potential clutch or motor problem?
... Dyson DC07 Bagless Upright Cyclonic Vacuum
When I tilt back handel and turn dial to carpet It makes a loud grinding noise
On a Dyson this engages the brush bar. Two possible faults: Debris (hair etc) caught in brush bar - cut out with knife. Or - damaged drive belt - pieces of belt striking casing. Last, but unlikely cause, debris in bearings of brush bar - replace brus ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
My riccar VACUUM CLEANER makes a loud grinding noise when it is in the unlocked position. When it is upright, it is quiet. Not used much, but local dealer out of business.
My dyson D17 is making an incredibly loud noise, like grinding, when the bottom brush rotates.
Remove the bottom cover plate and rotate the brush by hand. Look for things that make noise like stones caught in the brush path, bad brush bearings, bad drive belt. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
Dirt Devil Ultra: grinding noise, burning smell,brush not turning
This sounds like the motor went out ... Vacuums
I bought the Eureka 4703D model vacuum and my very first time powering it on, it was extremely loud - abnormally loud, and I don't know if it is loud like that because I possibly put it together wrong, or there is something wrong with it or it was previously damaged and I would like to know if this is something I can fix myself or do I have to take it back apart and return it to Walmart where I purchased it from. When it makes the loud noise, it does vacuum fine but the noise is just unbearable
... Eureka Power Plus 4703D Bagless Upright Vacuum
LOUD noise Turned on vacuum one day and it made a reallly loud noise like the belt had broken. So we replaced the belt correctly, and turned it on and the noise is still there it is also rattling violently. HELP PLEASE not exact same model but close enough
The armiter or fan is broken and if you get it replased it should work like new ... Hoover U5227-930 Elite Upright Vacuum
My vacuum is making a loud noise like I sucked up somehting I shouldn't have I have cleaned all the hair and made sure there was nothing else stuck in there but it continues to make that loud noise is there something else that will cause it to make this ugly noise, and how can I fix it
... Dyson DCO7 Upright Vacuum
Loud noise?? my vacuum suddenly just got really loud. it suctions fine, i changed the belt, but when the roller is off its not loud, but when i put it back on the 11noise is horrific. it vacuums fine i just cannot stand the noise. please help
I have the exact same problem. I've taken the thing apart and cannot figure out what is causing the noise. It's not the belt and it doesn't seem to be coming from the engine. It sounds like the spinning brush is hitting something, but it's not, th ... Bissell 6590 CleanView Bagless Upright Vacuum
Hi folks, my beam vacuum makes a very loud roaring noise quite often. the problem started when i was vacuuming up a quantity of vermiculite from my chimney. i think i overloaded the vacuum i think and it made this loud roaring noise. the vacuum tends to make thos noise when i am hoovering after 5 minutes or so. any ideas?. thanks in advance Tom....
If the filter bag is bad and didn't trap all of the dust, then it got into your motor, so you may have a problem with your motor now. ... Vacuums
Loud Noise My Kirby vacuum makes a very loud noise when it is turned on. It still works and picks up trash, but the noise is new.
I believe you will find the answer you seek by clicking on this link. \015\012\015\012http: ... Kirby Ultimate G Bagged Upright Vacuum
Bissel vacuum 82g71 making loud noise?
... Bissell 82G71 Upright Vacuum