Having problems with your Kenmore 23313 Whispertone Bagged Canister Vacuum ?
Powerhead does not work and the light doesn't work. Canister does work
\015 The powerhead does not work as well as the light. the canister vacuum does work.\015
Some of these has a reset button to push on the powerhead. Check the plug at the end of the hose handle, is it pushed in, if you push on it and it goes further in, then the tube in the handle will have to be replaced, the holding tab broke off of the tube. Pull the wand off and look at the prongs to see if they are burnt. it they are, then that power cord will have to replace as well as the want.
Repair Help & Product Troubleshooting for Kenmore 23313 Whispertone Bagged Canister Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Powerhead does not work and the light doesn't work. Canister does work
Some of these has a reset button to push on the powerhead. Check the plug at the end of the hose handle, is it pushed in, if you push on it and it goes further in, then the tube in the handle will have to be replaced, the holding tab broke off of th ... Kenmore 23313 Whispertone Bagged Canister Vacuum
The powerhead stop working followed by the entire canister not working. There are no lights and nothing funtions.
This unit is made by eureka \015\012just carrys eletrolux name \015\012the original electrolux is now called aerus ... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum
Powerhead doesnt work - Shark Professional Canister Vac - EP754 - Factory Serviced
... Shark Professional Canister Vac - EP754 - Factory Serviced
Powerhead doesnt work at all - Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum
Push the red reset button on top. ... Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum
I have an electrolux oxygen canister that's 4 yrs old and it just stop working. It just doesn't turn on and no lights display. I veryfied that the outlet works. I took it at my local Eletrolux store but they don't deal with this model. They told me that this model is made in Europe and they don't support it. Where can I take it to be looked at or do you have any ideas what the problem might be. Last time I used it it was working fine. Thanks, Rodi
... Electrolux Oxygen Z5540 Pet Lover Vacuum
Warning Light What does the light mean on the canister that has two prongs on one end and one on the other. The vacuum works fine but the light is on. I changed the bag and filter.
Check the hose and wands for a clog. Usually that light means a full bag, but a clog or restriction will also cause it to come on. ... Electrolux Epic 6500 Vacuum
I have a miele S4210 vacuum. It has a SAB100 accu nova battery brush which will not work. After charging the battery, light comes on saying not charged and now the power head brush won't turn. I had problems with my first powerhead so I purchased another and it worked for a short time and now I have the same problem again. I have four batteries I use interchangeably but nothing seems to work. I spent a fortune on this vacuum and to tell you the truth I hate it! Contacted Miele after 1st year of
... Miele S300 Bagged Canister Vacuum
I have a hoover Core vacuum. The problem is that the blue light flashes (as normal) when it is plugged in and the power is turned on and the blue light stays on (as normal) when you turn it on at the button but it makes no noise and doesnt work. All of the filters are clean. Can you help please?
... Hoover Vacuums
Miele Vacuum(Saturn300). Vacuum powerhead(SEB234/236) does not work, no light comes on and no power. is it the hose(SES119) or the powerhead? tried plugging and unplugging.
You need to check your voltage coming out of your hose and wand, be sure that the handle switch is in the on position. Voltage should be +/-120V. If you have voltage there then you have a power head issue. The replacement would be the ... Miele Vacuums
Sebo X4 when switched on bag full and check brush lights momentarily light up then go off and motor doesnt work
... Sebo X4 Bagged Upright Vacuum
The floor head is no longer working. The canister works, there is suction, but the floor head is dead. No lights, suction control switch inoperable, no headlight, nothing. It just stopped one day during a vacuum session. Thanks.
Hi poohbear4760...\012Check your wiring going to the vacuum head, some vacuums have a problem with corrosion on the plugs...take your connections loose and lightly sand with fine grit sandpaper the metal ends.\012Plug the wires back toge ... Vacuums
There doesnt seem to be any power to the powerhead what can i do even though the vacuum works without the powerhead
... Kenmore 25512/ 25513 Progressive Canister Vacuum
The beater bar motor doenst work when i push the bar button the bar button doesnt light up like power button how can i test bar motor or bar switch or what is the common problem wiyh this model I have 2 that dont work the same way
If it do not work ...and you already are on the second one that behaved in the same way it may be a problem with the power in your place and the cause it may be the main fuse...Im not sure where is located in this model but it has to be near the powe ... Vacuums
Miele Vacuume(Saturn300). Vacuum powerhead(SEB234/236) does not work, no light comes on and no power. is it the hose(SES119) or the powerhead? tried plugging and unplugging.
... Miele Vacuums
Vacuum head stopped working, unresponsive to on/off switch and light bulb is out. Canister otherwise works fine. Help!>?
Power head on/off switch could be faulty, Wires running through hose may be broken, electrical connections may be burnt.Motor in Powerhead could be dead. ... Vacuums
Canister works, vacuum doesnt
I 've been cannibalizing Kenmore canister vacs for decades b/c you can use some of the parts some of the time but not all of the parts all of the time. Presently I use the cannister of a maroon 24111 with the beater bar of 2395 b/c none of my colle ... Filter Queen Majestic Canister Vacuum
I have a GXCFD GE Smartwater hot, cold water dispensor, everything works but the hot water, doesnt light up, or get hot. any suggestions
If there is no hot water coming out from your instant hot-water dispenser, check the following to find out the prolem and fix it :\015\0121.Power: Under-the-counter hot water dispensers are plugged into a standard wall socket that suppli ... GE Vacuums
We have a kenmore canister vacuum, the part that is attached to the wand that picks up the dirt doesn't work, when it's on the carpet the light does not go on. Do we need to buy a new vacuum or is there a replacement for this part.
Hard to say without the correct model number.\015\012\015\012However, you could check these things first:\015\012\015\0121- Is the belt that runs the brushes on the end pieces broken? If it is, is needs to be replaced.\015\0122- Is there ... Kenmore Vacuums
I have the Riccar Starbright canister vacuum. I have replaced the bag and filter, however it will not work. All of the indicator lights are on and should be vacuuming, but nothing. This has
... Riccar 3623210300 RC 1700, 1800 Full Size Canister Electric Suction Hose
I have an Oreck canister vacuum, it says fc1000 on the bottom sticker, it's red. My problem is that the suction in it works perfectly, the belt is ok, and the roller can turn, but the motor doesnt turn it when I turn on the power.
Supervac premier Does not work 4.8v to connector contacts are clean But worn . Green light on canister. . What to check next?
... Hayden Industries SuperVac 3600 Central System Vacuum
I have a Kenmore Progressive Upright Vacuum - Purple, and it worked just fine. I emptied the canister (like always) and put it back in place. I turned on the vacuum to it immediately shutting down (motor) and only the lights come on. There is no movement/noise/suction at all! Any suggestions? I have tried everything. I have no idea why it did this.
Make sure that something didn't fall into the fan assembly in the base when the canister was removed. The motor should have an overload reset switch. Try moving the motor manually (power plug out) to make sure that it isn't bound up. ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum
The trigger on My Monster 1200W is not working. I poured the water in the canister and it sounds like it is steaming but when i go to push the button it doesnt spray.
... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
Won't turn on, red triangular warning light turns on. It worked a few days ago and now nothing happens when I press the button to turn the motor on. I have a Meile Champagne canister vaccum that won't run.
HiThe bad news is 99.9% the motor is gone ... Miele Blue Moon Bagged Canister Vacuum
My daughter left my Euro-Pro Steam Mop plugged in and now the light won't come on and it doesnt work. Is there a way to fix it. Maybe a way to reset?
Depending how long it was plugged in the power converter's capacitor may have cracked making the circuit incomplete now. Leave it unplugged for a few days and try it out again. If working it may work for awhile and quit. If this happens the power con ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum